2 Open the battery compartment door located at the base of the stand.
The following figure shows all three switches depressed to the
3 Depress all three battery switches to the
4 Close the battery compartment door. Press the door to ensure that it is locked.
W ARNINGS
5 Connect the system to AC power. Use one of the following methods, depending on your configuration:
10
Verify that the hospital supply voltage corresponds to the power supply voltage
range.
Plug the system only into a grounded hospital-grade outlet.
Use only power cords provided by FUJIFILM SonoSite with the system.
symbol, which is the ON position.
Charging the batteries and connecting the system to power
symbol, which is the OFF position.