Publicité
Les langues disponibles
Les langues disponibles
Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the
equipment. Exercise caution at all times, when using power equipment.
•
Read this owner's manual carefully and know how to
operate your snow thrower and how to stop the unit
and disengage the controls quickly.
•
Never allow children to operate the equipment.
•
Never allow adults to operate the equipment without
proper instruction.
•
Keep the area of operation clear of all persons,
especially small children, and pets.
•
Never operate the snow thrower without good visibility
or light.
•
Thoroughly inspect the area where the equipment is
to be used and remove all door mats, sleds, boards,
wires and other foreign objects.
•
Disengage all clutches and shift into neutral before
starting engine.
•
Do not operate equipment without wearing adequate
winter outer garments.
•
Wear substantial footwear which will protect feet and
improve footing on slippery surfaces.
•
Never operate the ATV snow thrower without attaching
the clip of the tethered safety switch to your clothing. A
riderless ATV with a running snow thrower could cause
serious injury to a fallen operator or to others.
•
Check fuel before starting the engine. Do not remove
the fuel cap or fill the fuel tank while the engine is
running or hot. Do not fill the fuel tank indoors. Gasoline
is an extremely flammable fuel.
•
Make sure the snow thrower height is adjusted to clear
the type of surface it will be used on.
•
Never make any adjustments while the engine is
running.
•
Always wear safety glasses or eye shield during
operation or while performing adjustment or repair.
•
Do not place hands or feet near rotating parts. Keep
clear of the discharge opening at all times.
•
Use extreme caution when operating on or crossing
gravel surfaces.
•
Do not carry passengers.
•
After striking a foreign object, stop the snow thrower
and ATV, set the brake on the ATV, remove the wire
from the spark plug on the snow thrower and then
thoroughly inspect the snow thrower for damage.
Repair any damage before restarting and operating
the snow thrower.
This document (or manual) is protected under the U.S. Copyright Laws and the copyright laws of foreign countries, pursuant to the
Universal Copyright Convention and the Berne convention. No part of this document may be reproduced or transmitted in any form or by
any means, electronic or mechanical, including photocopying or recording, or by any information storage or retrieval system, without the
express written permission of Agri-Fab, Inc. Unauthorized uses and/or reproductions of this manual will subject such unauthorized user
to civil and criminal penalties as provided by the United States Copyright Laws.
© 2007 Agri-Fab, Inc.
SAFeTY
•
If the snow thrower starts to vibrate abnormally,
stop the snow thrower and ATV immediately, set the
brake on the ATV, remove the spark plug on the snow
thrower and check for the cause. Vibration is generally
a warning of trouble.
•
Stop the snow thrower engine and remove the spark
plug wire whenever you leave the operating position,
before unclogging the snow thrower or making any
adjustments or inspections.
•
Take all possible precautions when leaving the unit
unattended. Disengage the clutch lever, lower the
snow thrower, set the parking brake, turn off the ATV
and snow thrower engines and remove the keys.
•
When cleaning, repairing or inspecting, make certain
all moving parts have stopped. Disconnect the spark
plug wire and keep it away from the plug to prevent
accidental starting.
•
Do not run engine indoors except when transporting
the snow thrower in or out of the building. Open the
outside doors. Exhaust fumes are dangerous.
•
Do not clear snow across the face of slopes. Exercise
extreme caution when changing direction on slopes.
Do not attempt to clear steep slopes. Refer to the slope
guide on page 34 of this manual.
•
Never operate the snow thrower without guards, plates
or other safety protection devices in place.
•
Never operate the snow thrower near glass enclosures,
automobiles, window wells, drop offs etc. without proper
adjustment of the snow thrower discharge angle.
•
Never direct discharge at bystanders or allow anyone
in front of the snow thrower.
•
Never run the snow thrower into material at high
speeds.
•
Do not overload the machine capacity by attempting to
clear snow at too fast a rate.
•
Never operate the machine at high transport speed
on slippery surfaces. Look behind and use care when
backing up.
•
Watch for traffic and stay alert when crossing or
operating near roadways.
•
Disengage power to the snow thrower when
transporting or when not in use.
•
Refer to ATV owners manual before using other
attachments or accessories.
•
Never operate the snow thrower without good visibility
or light.
2
Publicité
