Lowenstein Medical SOMNOvent ST Mode D'emploi page 35

6. Insert the hose from your oxygen system onto the inlet
side of the valve (large scket on the right)
7. Assemble the exhalation system and the mask
according to the relevant instruction manuals.
8. Remove the seal from the port on the mask and attach
the O supply hose there.
2
9. To humidify respiratory air, use the humidifier obtain-
able for your therapy device. Additional humification of
the oxygen with a bubble humidifier is allowed, but is
not necessary.
The use of an atomizer is not permitted.
A hose system with an internal O
as an accessory.
You can use the hose system with the following devices:
CPAP devices
• SOMNOsmart 2
• SOMNOset
nCPAP devices
• SOMNOcomfort
• SOMNOsoft +
BiLevel devices
• SOMNOvent S
• SOMNOvent ST
• SOMNOvent auto-S
• SOMNOvent auto-ST
CS devices
• SOMNOvent CR
supply hose is available
2
Setting up the device
.
11
35
EN