switel WT330 Mode D'emploi page 64

In order to avoid this, one of 38 CTCSS codes can be
defined in addition to the channel. Both radios must
then be set to the same channel and the same
CTCSS code. Check between yourselves which
channel and which code have been selected.
NOTE: When CTCSS code 00 is set, the user will
hear all calls on the set channel regardless of which
CTCSS code is being used for speech. Therefore all
CTCSS codes as well.
1. Press the
code will flash in the display.
2. A new code between 01 and 38 can now be
selected using the
00 is selected, all calls will be made on the
selected channel.
3. Confirm the selection with the talk button on the
left-hand side.
3
Note: The selected channel and the CTCSS code
must correspond for you to be able to talk to one
another.
- Operation -
button twice. The current CTCSS
Radio 1
05
and buttons. If code
Radio 2
3
05
64