Channel Search (Scan Mode) - switel WT330 Mode D'emploi

Button
12 x
13 x
14 x
15 x
4.2

Channel search (scan mode)

When channel search (scan) is switched on, all 8
channels are continuously polled until the radio finds
a channel that is being used for speech. The channel
will be found even if other radios are speaking on one
of the 38 call codes.
The search is started in the up or down direction with
and
the
scanned one after the other. If a channel is found on
which there is continuous speech, the channel search
will be suspended for 2 seconds. Press the call
button during this time if you want to keep the
channel that has been found and exit the channel
search. Channel search can be switched off at any
time with the call button.
69
- Programming options -
Select with
Roger Beep
On / Off
Key tones
On / Off
Baby monitor On/Off
Sensitivity 1 to 7, Off
Stopwatch
buttons. All channels will now be
and
Display
RG
KB
BM