EB TECHNOLOGY START-S11 Mode D'emploi page 60

START-S11
Group functions S
Set
Description
up
S 01 Logic of function:
1 - Fast renverse
2 - Collective use
3 - Bistable function
4 - Bistable function with automatic reclosing
5 - Industrial use
6 - "Death man" function
S 02 Activation of SELF-CYCLE when the tension is coming again
S 03 Activation of COURTESY LIGHT on the lamp output
S 04 Activation of ACCESS CONTROL
S 05 Activation of LAMP IN PAUSE TIME
S 06 Activation of TEST in the inputs - OFF interblock
S 07 Activation of FIXED LIGHT
S 08 Activation of the ROLLING HCS function
S 09 Activation of the SOFT START
S 10 Activation of the MOTOR FUNCTION
S 11 Activation of input OLS1
S 12 Activation of input CLS1
S 13 Activation of input OLS2
S 14 Activation of input CLS2
S 15 Activation input STOP
S 16 Activation input PHOTO
S 17 Activation of the input PHOTO-STOP
S 18 RESET of the standard programmed values
S 19 Activation of the RENVERSE by access control (S 04 = 1)
S 20 Logic of the OBSTACLE DETECTION:
1 - Works as LIMIT SWITCH
2 - Works as STOP
3 - Considered as STOP but before the motors renverse
S 21 Not used
S 22 Test in the input PHOTO when closing
Val. Accepted Standard
-32-
Technical manual
from 1 to 6
0 Off - 1 On
0 Off - 1 On
0 Off - 1 On
0 Off - 1 On
0 Off - 1 On
0 Off - 1 On
0 Off - 1 On
0 Off - 1 On
0 Off - 1 On
0 Off - 1 On
0 Off - 1 On
0 Off - 1 On
0 Off - 1 On
0 Off - 1 On
0 Off - 1 On
0 Off - 1 On
0 Off - 1 On
from 1 to 3
0 Off - 1 On
Memo
1
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
1
0