EB TECHNOLOGY START-S11 Mode D'emploi page 31

START-S11
1 Introduction
1.1 Safety precautions
Using the unit improperly and performing repairs or modifications personally will void the warranty. The pro-
ducer declines any responsibility for damages due to inappropriate use of the product and due to any use
other than the use the product was designed for. The producer declines any responsibility for consequential
damages except civil liability for the products.
Every programming and/or every maintenance service should be done by qualified technicians.
Prima di iniziare l'installazione, verificare la robustezza e la consistenza meccanica del cancello o portone,
verificare che gli arresti meccanici siano adatti a fermare il movimento del cancello o portone anche nel caso
di un guasto ai finecorsa elettrici o durante la manovra manuale.
1.2 Symbols and warning
DANGEROUS
This is a warning and if it is not
respec it can provoque material
damage.
DEVICE UNDER TENSION
The installation should be done
only from professional installer.
1.3 Security system
These two simple diagrams show only one of the possible applications for this control unit. The risks inherent
to the "MACHINE" and the user's requirements must be analyzed in depth in order to establish how many
elements need to be installed.
For a sure installation we suggest to install a STOP SWITCH , when it is working it stops immediatelly the
door. The SWITCH should have a normally closed contact and it opens when it is working (see Par. 3.7)
READ CAREFULLY THE
OPERATING MANUAL
Read carefully this manul before
installation and keep it for the fu-
ture.
-3-
Technical manual