EB TECHNOLOGY START-S11 Mode D'emploi page 30

START-S11
Foreword
This manual provides all the specific information
you need to familiarize yourself with and correctly
operate your unit. Read it very carefully when you
purchase the instrument and consult it whenever
you have doubts regarding use and before perfor-
ming any maintenance operations. The producer
has the right to modify the product without previous
notice.
Safety precautions
Information regarding the environment
for customers within the European
Union. European Directive EC 2002/96
requires that units bearing this symbol
on the unit and/or on the packaging be
disposed of separately from undifferenti-
ated urban wastes.
The symbol indicates that the product must not be
disposed of with the normal household wastes.
The owner is responsible for disposing of this prod-
uct and other electrical and electronic equipment
through specific waste collection facilities indicated
by the government or local public agencies. Correct
disposal and recycling help prevent any potentially
negative impact on the environment and human
health. To receive more detailed information re-
garding disposal of your unit, we recommend that
you contact the competent public agencies, the
waste collection
Small Legend Piccol
OLS open limit switch
CLS close limit switch
START
control to drive the gate
PEDESTRIAN in sliding units: control partial opening
Vac alternate current
Vdc direct current
NC Normally closed contact
NO Normally open contact
Isolated contact Isolated from tensions
Index
Par. Description
2 Scheme and connections
3 Use of the control panel
3.1 Selection functions
3.2 Example of the "Menù"
4 Timer
4.1 Selection of the time (day and hour)
4.2 Function of P
4.3 Activation and Deactivation of the automatic door
and stop of the automation
4.4 Set up and change of the time
5 Installation and connection
5.1 Connection of the POWER SUPPLY
5.2 Connection of the MOTORS
5.3 Connection of the LAMP
5.4 Time for Pre-LIGHTING
5.5 Connection of a 24Vdc LAMP
5.6 Connection of the COURTESY LIGHT
5.7 Connection of a 12Vac ELECTRICAL LOCk
5.8 Connection of the OLS and CLS
5.9 Connection of an OPENING command
5.10 Connection of STOP
5.11 Connection of the ANTENNA
5.12 Power Supply of the accessories
5.13 Connection of the MOTOR with INTERLOCk
5.14 Connection of a PHOTO-A (when closing)
5.15 Connection of a PHOTO-A with TEST
5.16 Connection of a PHOTO-B (opening and closing )
5.17 Connection of a PHOTO-B with TEST
6 Function and adjustment
6.1 Logic of function
7 Learning and programming
7.1 Set up of the force and slow down
7.2 Obstacle detection
7.3 Working time learning
8 Managing of the remote control
8.1 Cancellation of the memory CODE
8.2 Activation of the Rolling Code
8.3 Memorization of CODES
8.4 Cancellation of a SINGLE CODE
9 Changing of the working time and adjustments
10 Reset of the control board and to the standard
value
11 Recapitulary table START-S11
12 Conformity declaration
-2-
Technical manual
Pag.
6
8
9
11
12
13
15
16
17
18
19
20
21
22
23
25
26
27
29
30
34