EB TECHNOLOGY START-S11 Mode D'emploi page 37

START-S11
3.2 Example how to use the MENU and reading of information
START-S11 can activate separately, until P1 will be released, opens, closes and the output of lamps and
test. This is can be useful in case to check the correct function of the outputs and the correct function of the
devices.
P1
Access to
the functions
SyMBOLS
Press and
release
Confi rm with P1 in the set up R and you can go to the "subfunction", choosing with the buttons P2 and P3 and
then confi rm with P1. Now we are in the function R01, R02, R...
DOwN
P2
P3 uP
-t-
Keep pressed Release
r 01
r 02
r 03
r 04
r 05
P2
MEMORISATION OF THE WORkING TIME.
See next chapters
ELECTRIC LOCk
P1
P1
activated TEST
P1
activated LIGHT
P1
-9-
Technical manual
-L-
P2 - 1st Press
-S-
P2 - 2nd Press
-c-
P2 - 3td Press
-r-
P2 - 4th Press
P1 confi rm
activated
activated
LAMP
P1
P1
P1
P1