EB TECHNOLOGY START-S11 Mode D'emploi page 36

START-S11
3 Use and functions of the control panel
START-S11 has a display for an intuitive programming. The structure of the menu has been designer for
a fast and clear set up of the working time and fucntions. We recommend to set up the functions when the
gate is closed.
3.1 Settings and parameters
ACCESS TO THE FUNCTIONS
Press P1 when the gate is closed
P1
P2 - uP
P3 - DOwN
-t-
-C-
-r-
-E-
P2 - uP
P3 - DOwN
+
P2 P3
SELF-RESET
If the control unit is not used for more than one minute, the control unit go out from
the programming without saving any programs and all changes will be cancelled.
SELECTION OF THE ADJUSTMENT
Press button P2 and P3 to select the group
and press P1 to confi rm.
P1 - Confi rm
Set up T
Set up of the Time
programming
Set Up C
Set up of the working
time (Speed, forces...)
Set up R
Activation of the outputs.
Set up E
Back to the standard functions
SELECTION OF THE SET UP
Press P2 and P3 to select the group
Press P1 to confi rm
P1 - Confi rm
GO BACk
To go back to the previous group press P2 and P3
-L-
-S-
-P-
-8-
Technical manual
Set up L
Set up of the programm
(Speed, power...)
Set Up S
Logic of function
Set Up P
Settings Clock