EB TECHNOLOGY START-S11 Mode D'emploi page 52

START-S11
10
P1
1
11
Closing time MOT2:
12
memorized
13
14
Closing time MOT1:
15
memorized
16
1
2
>
Mot 2 closes.
2
Wait until the second leaf is completelly closed.
If the CLS2 is not installed press P1, otherwise if the CLS2 is
connected don't do nothing because the limit switch gives a drive
to the memorization.
2
1
First motor starts closing.
1 2
Wait until fi rst motor is completelly closed.
If the CLS1 is not installed press P1, otherwise if the CLS1 is
connected don't do nothing because the limit switch gives a drive
to the memorization.
Memorization of the START times correct!
The control unit exits from all function.
-24-
Technical manual