EB TECHNOLOGY START-S11 Mode D'emploi page 40

START-S11
4.2 List of the functions P
This function can cancel the time slots, when you need to re-programm the time slots. Go to function P:
DOwN
P2
P3 uP
4.3 Activation/Deactivation of the automatic opening and block
If the parameters P01 or P02 are activated (function no.1) the control unit will manage the automatic opening
and block in the programmed time slots.
The display shows alternatively the following notes. Opening and block time slots can be activated in the
same period of time.
tr.AP.
tr.bL.
P 01
P 02
P 03
P 04
P 05
P 06
AUTOMATIC OPENING of the time slots
ACTIVATED
BLOCk time slot
ACTIVATED
ACTIVATE opening in
programmed time slots
STOP of the automation
from a remote control
PROGRAMM of the
OPENING time slots
PROGRAMM of the
BLOCk time slots
CANCEL the
OPENING time slots
CANCEL of the
BLOCk time slots
-12-
Technical manual
0 - Off (Standard)
1 - On
0 - Off (Standard)
1 - On