EB TECHNOLOGY START-S11 Mode D'emploi page 57

START-S11
10 Reset of the control board and set up of the standard values
START-S11 can be programmed to the standard production values (See Par. 11).
Select funciton S18 as shown:
P1
Access to
the functions
S 01
S 18
!
wARNING:
This operation cancel all data.
-t-
P2
P1 - Ok
P2
2nd press
P 10
To cancel the operation
Wait 10 seconds, otherwise, if you press
P1 in 10 seconds, this operation will be
cancelled.
-29-
Technical manual
-S-
P1 confi rm