Webasto Pure Notice D'utilisation Et De Montage page 11

X
3
Key-operated switch set to ON.
X
3
No vehicle connected.
Set key-operated switch from ON to OFF (Fig. 07); wait
X X
until LED indicator flashes blue 3 times.
Set key-operated switch from OFF to ON (for max. 3
X X
seconds).
Set key-operated switch from ON to OFF; wait until LED
X X
indicator flashes blue once.
Set key-operated switch from OFF to ON (for max. 3
X X
seconds).
Set key-operated switch from ON to OFF; wait until LED
X X
indicator flashes blue 3 times.
When the LED indicator flashes for the fourth time it
X X
changes to white and the charging station automatically
assumes programming mode.
Programming mode activated
The charging station runs through 2 options 10 times. If no
option is selected with the key-operated switch after the
charging station has run through them 10 times, program-
ming mode will be deactivated automatically without any
changes.
9.2 Dim LED indicator (option 1)
X
3 Programming mode activated
The LED indicator flashes white in the following sequence
once:
– 0.5 s OFF;
– 0.5 s ON;
After a 4 second pause the LED indicator switches to yellow
for 1 second:
Set key-operated switch from OFF to ON:
X X
– "Dim LED indicator" function activated.
The LED indicator changes to blue and dims from maximum
to minimum. After reaching the lowest dim level the LED
indicator switches back to maximum.
Set key-operated switch from ON to OFF:
X X
– Dim level is selected.
If the key-operated switch setting is not changed within 60
seconds, the selected dim level will be saved and program-
ming mode deactivated.
6
Set key-operated switch back from OFF to ON to switch
X X
to standby mode.
If the key-operated switch setting is not changed
within 180 seconds, the new value will be saved and
programming mode deactivated.
9.3 Set charging current limit (option 2)
Sets the charging current only for the 22 kW variant.
X
3 Programming mode activated
The LED indicator flashes white in the following sequence
once: 0.5 s OFF;
0.5 s ON;
0.5 s OFF;
0.5 s ON;
After a 3 second pause the LED indicator switches to yellow
for 1 second:
Set key-operated switch from OFF to ON:
X X
– "Charging current limit" function activated.
The current limit setting is indicated in colour by the LED:
20 A = purple
32 A = light blue
The currently permissible charging current will not change if
the key-operated switch remains set to ON (factory setting:
20 A limit activated).
Set key-operated switch from ON to OFF:
X X
X
3 20 A charging current limit activated:
– The 32 A charging current limit is activated. The LED
indicator changes to light blue.
X
3 32 A charging current limit activated:
– The 20 A charging current limit is activated. The LED
indicator changes to purple.
Set key-operated switch back from OFF to ON to switch
X X
to standby mode.
If the key-operated switch setting is not changed
within 60 seconds, the new value will be saved and
programming mode deactivated.
10 Decommissioning the product
Have the decommissioning carried out only by an autho-
rised electrician.
Disconnect the power supply.
X X
Electrically disconnect the charging station.
X X
Disposal: see chapter 12.
X X
11 Maintenance, cleaning, repair
11.1 Maintenance
Have maintenance carried out only by an authorised electri-
cian in accordance with local requirements.
11.2 Cleaning
DANGER
High voltages
Danger of fatal electric shock.
Never clean the charging station with a high-pressure
cleaner or similar device.
Clean the installation only with a dry cloth. Do not use
X X
aggressive cleaning agents, wax or solvents.
11.3 Repair
Unauthorised repair of the charging station is not per-
mitted. If it fails, the complete charging station must be
replaced.
Webasto Thermo & Comfort SE reserves the exclusive right
to perform repairs on the charging station.
The only repair on the charging station that is permitted
is to have the charging cable replaced by an authorised
electrician.
11.4 To replace the charging cable
DANGER
Hazardous voltages in the device
Danger of fatal electric shock.
The charging cable of the Webasto PURE must
X X
only be replaced by an authorised electrician.
Before carrying out any work on the charging
X X
station, switch off the power supply to the
charging station and secure to prevent restart.
Make sure that the electrical connections are
X X
safely isolated from the power supply.
Do not leave the charging station unattended with
X X
the cover open.
Webasto PURE