Publicité
Manufacturer:
scheppach Fabrikation von Holzbearbeitungsmaschinen
GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
we wish you a pleasant and successful working experi-
ence with your new scheppach machine.
Advice:
According to the applicable product liability law the man-
ufacturer of this device is not liable for damages which
arise on or in connection with this device in case of:
•
improper handling,
•
non-compliance with the instructions for use,
•
repairs by third party, non authorized skilled workers,
•
installation and replacement of non-original spare
parts,
•
improper use,
We recommend
that you read through the entire operating instructions
before putting into operation.
These operating instructions are to assist you in getting
to know your machine and utilize its proper applications.
The operating instructions contain important notes on
how you work with the machine safely, expertly, and eco-
nomically, and how you can avoid hazards, save repair
costs, reduce downtime and increase the reliability and
service life of the machine.
In addition to the safety requirements contained in these
operating instructions, you must be careful to observe
your country's applicable regulations.
The operating instructions must always be near the ma-
chine. Put them in a plastic folder to protect them from
dirt and humidity. They must be read by every operator
before beginning work and observed conscientiously. Only
persons who have been trained in the use of the machine
and have been informed of the various dangers may work
with the machine. The required minimum age must be
observed.
In addition to the safety requirements contained in these
operating instructions and your country's applicable reg-
ulations, you should observe the generally recognized
technical rules concerning the operation of woodworking
machines.
General notes
•
After unpacking, check all parts for any transport
damage. Inform the supplier immediately of any
faults.
•
Later complaints cannot be considered.
•
Make sure the delivery is complete.
•
Before putting into operation, familiarize yourself
with the machine by carefully reading these instruc-
tions.
•
Use only original accessories, wearing or replacement
parts. You can find replacement parts at your Schep-
5
Publicité
