Publicité
•
Do not use any low-powered machines for heavy duty
work.
•
Make sure you stand squarely and keep your balance
at all times.
•
Check the tool for damage.
•
Each time before re-using the tool, carefully check
that the guards or any slightly damaged parts are
working as intended.
•
Check that the moving parts are in good working order,
that they do not jam, and that no parts are damaged.
Make sure that all parts are fitted correctly and that
all other operating conditions are properly fulfilled.
•
Unless otherwise stated in the operating instructions,
damaged safety devices and parts must be repaired
or replaced by an authorized service center.
•
Have damaged switches replaced by a customer ser-
vice workshop.
•
If necessary, wear suitable personal protection equip-
ment. This could consist of:
-
Ear plugs to prevent the risk of damaging your hear-
ing;
-
A breathing mask to avoid the risk of inhaling hazard-
ous dust.
-
Always wear gloves when handling saw blades and
rough materials. Whenever practicable, saw blades
must be carried in a container.
•
The operator must be informed about the conditions
that influence the generation of noise (for example
saw blades designed to reduce noise emissions, car-
ing for blades and the machine).
•
Faults on the machine or its guards, safety devices
and blade must be reported to the person in charge
as soon as they are discovered.
•
Use only the transport devices to move the machine.
Never use the guards for handling and moving the
machine.
•
All operators must receive proper training in the use,
adjustment and operation of the machine.
•
Do not saw any materials that contain foreign bodies
such as wires, cables or ties.
•
Only use sharp saw blades
13
Publicité
