Medela Invil Liberty Mode D'emploi page 10

2. Charge battery for the first time.
Connect Invia Liberty to electrical
outlet, battery is being charged.
The battery must be fully charged before first use.
a)
To disconnect Invia Liberty from the
electrical source:
Release the plug's safety lock by pulling only on
the plug's hard housing.
Do not pull on the cable or the anti-bend
protection!
b) Invia Liberty switches off automatically.
If Invia Liberty was switched on before battery was fully charged (step 2),
follow the instruction on the display.
3. Select language.
a) Switch Invia Liberty on with [
b) Select language (by following instructions on display), confirm with "Ok".
4. Select time zone.
a) Select the time zone you are in. Refer to the chart in the back of the
instructions.
b) Switch Invia Liberty off with [
for use.
8
EN
after
max.
Battery is being
charged
> 3 sec] , self test starts.
> 3 sec.]. Invia Liberty is now ready
3 h
Battery is fully
charged