SOLIS 824 Mode D'emploi page 74

Stopping the operation
At the end of use, always ensure the blender is turned off by pressing the 'Power'
button on the control panel. Then unplug the plug. Ensure the motor and blades
have completely stopped before attempting to move the appliance or to remove
blender jug and lid. When the blender is not in use and before disassembling,
cleaning and storing, please take care that the power plug is unplugged.
Notes:
– During the blending process, ingredients may stick to the sides of the
blender jug. To push the food back onto the blades, press the 'Power'
button on the control panel and remove the power plug. Remove the
lid and use a plastic spatula to scrape down the sides of the jug.
Replace the lid before recommencing blending.
– If any moisture or liquid appears on top of the motor base during
blending, press the 'Power' button on the control panel and remove
the power plug. Remove the blender jug. Wipe the motor base imme-
diately with a dry cloth or paper toweling to absorb the liquid. Check
the blender jug and lid are correctly assembled.
– Never place anything other than food and liquids in the blender whilst
the motor is running.
74