SOLIS 824 Mode D'emploi page 72

Note:
Your SOLIS Perfect Blender Pro features a special lid. This allows the lid to
fit tightly onto the blender jug, avoiding displacement during operation.
The ring pull design allows the user to easily remove the lid with a simple
leverage action.
Step 4
Plug power cord into a 230 –240 V power outlet.
Step 5
Press the 'Power' button
on. The 'Power' button will illuminate and flash. The LCD timer screen will illumi-
nate with '00' displayed.
Note:
Do not fill the blender jug above the 'MAX' line. When the blender jug is
filled at or near the 'MAX' line place one hand on the blender lid to avoid
displacement of the lid during operation.
Step 6
Select the required speed (1 to 5) by pressing the corresponding speed button. The
blender will start to operate and the selected speed button will illuminate. The
'Power' button will illuminate and cease to flash.
The 'Stop' button will illuminate and flash. The LCD timer screen will start count-
ing upwards in one second increments until 120 seconds is reached.
Note:
Operate the blender only for the appropriate amount of time required – do
not over blend.
Step 7
When 120 seconds is reached, the blender will automatically cease to operate and
the selected speed button and 'Stop' button illumination will go out. The 'Power'
button will illuminate and flash. After a few seconds the LCD timer screen will
revert to '00'.
Notes:
– The Blender will automatically stop blending after 120 seconds (2 min-
utes). This is a safety feature and restricts wear on the motor.
– To stop blending at any time, press the 'Stop' button or the selected speed
button. The 'Power' button can also be pressed, but this will also turn the
appliance off and all illuminations will go out.
– The speed can be changed at any time during the blending process.
Each time a new speed is selected its button will illuminate and the pre-
vious speed button illumination will go out. The number of seconds on
the LCD timer screen will continue to count upwards to 120 seconds unless
interrupted.
72
on the far left of the control panel to turn the blender