Publicité
Les langues disponibles
Les langues disponibles
• The engine should be turned off when the unit is
moved from on working area to another.
• After the engine has stopped, the muffler is still hot.
Never touch hot parts such as the muffler.
• Make sure that no fuel leaks from the tank.
EXTENDED STORAGE
• Inspect, clean and repair unit if necessary.
• Remove all fuel from the tank.
• Start engine – this will consume all remainders of
fuel in the fuel line and carburettor.
• Remove spark plug and pour one tea spoon of clean
motor oil into spark plug hole of cylinder; put spark
plug back in place.
• Store the unit in a clean, dry, dust-free place.
FAILURES such as difficulties starting the engine, ir-
regularities during operation and abnormalities in per-
formance can normally be prevented if the Operating
Instructions and maintenance procedures are carefully
adhered to. If the engine does not work properly, check
the following:
• Is the fuel system in good condition and is fuel
flowing to the engine?
• Is the ignition system in good condition and does
the spark plug work correctly?
• Is the compression of the engine adequate?
FAILURE TO START
· Dispose of fuel in the tank.
· Fill the tank with fresh and clean fuel.
· Check fuel filter for dirt; make sure it is clean. (Re-
place filter if necessary.)
· Make sure that all air cleaner elements are clean.
· Install a new, properly gapped spark plug.
· Should you experience serious trouble with the unit,
do not try to repair it yourself, but have your distribu-
tor or dealer do it for you.
Waste disposal and environmental protec-
tion
Never pour remainders of chain lubricant or 2-stroke
fuel mixture in the drain or sewerage system or soil, but
dispose of it in a proper, environmentally friendly way,
e.g., at a special collecting point or dump.
If your device should become useless somewhere in
the future or you do not need it any longer, do not dis-
pose of the device together with your domestic refuse,
but dispose of it in an environmentally friendly manner.
Thoroughly empty the oil/lubricant and fuel tanks and
dispose of the remainders at a special collecting point
or dump. Please also dispose of the device itself at
an according collecting/recycling point. By doing so,
plastic and metal parts can be separated and recycled.
Information concerning the disposal of materials and
devices are available from your local administration.
GB-11
Publicité
