Connecting And Controlling Room 2 Equipment; Connections - Yamaha RX-V992 Mode D'emploi

CONNECTING AND CONTROLLING ROOM 2 EQUIPMENT

You can make up a multi-room audio/video system with this
unit. In this system, this unit and Yamaha audio/video units
connected to this unit in the main room can be controlled so that
they sends audio and video signals (different from ones you are
listening to and/or watching in the main room) to the amplifier,
monitor TV, etc. in the second room.

CONNECTIONS

To use the multi-room functions of this unit, you need the
following additional optional products:
An infrared signal receiver for the second room
An infrared emitter in the main room
This emitter transmits the infrared signals from the remote
control unit in the second room to the other components in the
main room (for example, CD player or LD player).
An amplifier and speakers for the second room
A video monitor for the second room
NOTE
Since there are so many ways to connect and use this unit in a
multi-room installation, we recommend that you consult with a
custom installation specialist for the Room 2 connections which
will best meet your requirements.
1
:Some Yamaha models are able to connect directly to this unit
*
via the REMOTE CONTROL OUT jacks. If you own these
products, the use of an infrared emitter may not be necessary.
38
A Sample of system configuration and connections
Main Room
LD player etc.
*
Infrared emitter
Second Room
Amplifier
Infrared signal receiver
This unit
1
Monitor TV
Remote control
unit