Yamaha RX-V992 Mode D'emploi page 75

NOTES
• A key in which no function is stored will carry out no command.
• If it occurs that this unit will not receive the second command
because the internal operation of the first command takes a
long time, set the MACRO switch to the "SLOW" position, or
add no function or repeat the same command between the first
command and the next command.
• If you will program the power on/off switching function of TV,
VCR, etc. as part of a macro sequence, note that it switches
the current mode to the other ("on" to "off", or "off" to "on").
For example, when you press the macro key, if the power of TV,
VCR, etc. is already on, the power will be turned off even
though you may not want it to do so.
• Once you press a macro key, this unit will not receive the
command of another key (even if it is pressed) until this unit
finishes carrying out all commands of the macro key. Take
notice of this especially when the MACRO switch is in the
"SLOW" position.
• Once you press a macro key, you must keep the remote control
unit directed at the main unit's remote control sensor until the
remote control unit finishes transmitting all command signals of
the macro key.
• You can use the OPERATION CONTROL keys also while using
the macro functions.
71