Display Panel - Yamaha RX-V992 Mode D'emploi

N
–/+ Button
Adjusts the level of item selected by pressing the
DELAY/CENTER/REAR/SWFR switch. Moreover, performs
setting changes and adjustments for functions selected by
pressing the SET MENU switch.
O
SET MENU Switch
Whenever pressed, selects functions in the SET MENU mode.

DISPLAY PANEL

4
1
Preset Station Number Display
Shows the selected preset station number (1 to 8) and its group
(A to E).
2
Input Source/Station Frequency Display
Shows the currently selected input source, or the currently
selected station frequency and the band (FM or AM) when this
unit is in the tuner input source mode.
16
1 2
PRESET
AM
FM
TAPE 2 MONITOR
MEMORY STEREO
AUTO TUNING
SPEAKERS SPEAKERS
A B
0 20 40 60
5 6 7 8
P
Auxiliary Input Jacks (VIDEO AUX)
Connect an auxiliary video or audio unit such as a camcorder to
these jacks. If the connected video unit has a S video output
terminal, connect it to the S VIDEO jack to obtain a high resolution
picture. The unit connected to these jacks can be selected by the
corresponding input selector button and REC OUT/ROOM 2
SELECTOR.
3
DIGITAL
kHz ENHANCED
MHz
70 mm
DIGITAL
PCM DIGITAL
I00
9
3
Multi-informatiom Display
Shows the currently selected DSP program, or information for
several adjustments or setting changes made on this unit.
4
MEMORY Indicator
When the MEMORY button is pressed, this indicator flashes for
about 5 seconds. During this period, the displayed station can
be programmed to the memory by using the A/B/C/D/E switch
and the preset station number selector buttons.
mS dB
DSP PRO LOGIC
SLEEP
0 A