Yamaha RX-V992 Mode D'emploi page 35

CONNECTING THE MAIN SPEAKERS TO THIS UNIT
One or two sets of MAIN speakers can be connected to this
unit.
If you use two sets of MAIN speakers, connect one set to the
MAIN SPEAKERS A terminals, and connect another set to the B
terminals. If you use only one set of MAIN speakers, connect them
to either the MAIN SPEAKERS A or B terminals.
It is also possible to use an external power amplifier if more
power is desired. In this case, connect the MAIN OUTPUT jacks to
the INPUT jacks of a stereo power amplifier with a stereo pin
cable—making sure to connect the left and right channels
correctly. Connect the MAIN speakers to the speaker output
terminals of the power amplifier.
Set the SPEAKERS switch A or B (or both A and B) on the
front panel corresponding to the main speakers you will use to the
ON position. Set the switch for the main speakers you will not use
to the OFF position. Selected main speakers are shown by the
lighting of "SPEAKERS A" and/or "SPEAKERS B" on the display
panel.
Main speaker A
Power amplifier
This unit
Main speaker B
Main speaker A
INPUT
MAIN OUTPUT
Main speaker B
31