BRAND seripettor Mode D'emploi page 34

First Steps
Assembly (cont.)
3.
Mounting the
filling tube
4.
Mounting the
instrument on
a bottle
5.
Transporting the
instrument
34
seripettor :
®
Cut off the filling tube to accommodate
the bottle height, and attach it (fig. 3).
seripettor pro:
®
Adjust the length of the telescopic filling
tube to the bottle height and attach it
(fig. 3').
Screw the instrument (GL 45 thread)
onto the reagent bottle (fig. 4).
To prevent tipping over use a bottle stand
for small bottles.
Note:
For bottles with other thread sizes,
select a suitable adapter (Accessories,
page 45).
Warning:
Always wear protective gloves when
touching the instrument or the bottle,
especially when using dangerous liquids.
When mounted to a reagent bottle,
always carry the instrument as shown
in the figure (fig. 5) and always store it in
the upright position!
3 3'
4
5