XI -
Menu technicien
Pour entrer dans le menu technicien, accéder au menu configuration en appuyant sur «S»
(maintenir l'appui) puis sur «+» pendant environ 3 secondes. Ensuite, après avoir relâché ces
deux touches, appuer de nouveau sur «S» puis «+» pendant environ 7 secondes.
11.1 Menu technicien toutes versions sauf Style 7D-7E-10D-10SD
Synchronisation Radio (ALS(FI) + DCF)
+
S
+
Hold down for 3 seconds
Open configuration menu
+
S
+
Hold down for 7 seconds
Software version
May differ from the version shown depending on the date of purchase.
S
+
S
S
+
S
+
S
+
S
Display test (tests for correct functioning of all LEDs)
S
End of menu
72
+
Select radio synchronisation
The double hyphen indicates good reception
+
+
+
...
Resetting the clock (enabled if "rstY" is selected)
Restore to factory settings (enabled if "dF Y" is selected)
Search the information frame in accordance with
the selected synchronisation. Default: Auto mode.
Wait for the ALS(FI) signal for about 3 minutes before checking
DCF synchronisation then synchronisation of another antenna (e.g. GPS).
Check reception from an antenna if one is connected.
Dynamic display of ALS(FI) or DCF signal frames
+
+
...
FR
Set T° offset
(Style 10-10S)