Démodulation Analogique - Rohde & Schwarz FSEA20 Manuel D'utilisation

Commande manuelle / à distance: Analyse vectorielle
SLOPE
POS NEG
MEAS ONLY
IF SYNC'D
FIND BURST
ON OFF
FIND SYNC
ON OFF
SYNC
OFFSET
SYNC
PATTERN
SELECT
PATTERN
NEW SYNC
PATTERN
NAME
COMMENT
VALUE
SAVE
PATTERN
EDIT SYNC
PATTERN
DELETE
PATTERN
Touche TRIGGER
TRIGGER
FREE RUN
VIDEO
EXTERN
AF SIGNAL
SLOPE
POS/NEG
TRIGGER
OFFSET
1065.6016.13
:TRIGger<1|2>[:SEQuence]:SLOPe POSitive|NEGative
:[SENSe<1|2>:]DDEMod:SEARch:SYNC:MONLy
:[SENSe<1|2>:]DDEMod:SEARch:PULSe:STATe
:[SENSe<1|2>:]DDEMod:SEARch:SYNC:STATe
:[SENSe<1|2>:]DDEMod:SEARch:SYNC:OFFSet <num_value>
--
:[SENSe<1|2>:]DDEMod:SEARch:SYNC:SELect <pattern_name>
:[SENSe<1|2>:]DDEMod:SEARch:SYNC:PATTern <string>
:[SENSe<1|2>:]DDEMod:SEARch:SYNC:NAME <pattern_name>
:[SENSe<1|2>:]DDEMod:SEARch:SYNC:COMMent <string>
:[SENSe<1|2>:]DDEMod:SEARch:SYNC:DATA <string>
:[SENSe<1|2>:]DDEMod:SEARch:SYNC:PATTern <string>
(Le profil se règle dans l'appareil et un profil nommé remote.pat est mémorisé)
s'effectue automatiquement dans le mode télécommande
:[SENSe<1|2>:]DDEMod:SEARch:SYNC:PATTern <string>
:[SENSe<1|2>:]DDEMod:SEARch:SYNC:DELete
Démodulation analogique
-
:TRIGger<1|2>[:SEQuence]:SOURce
:TRIGger<1|2>[:SEQuence]:SOURce VIDeo
:TRIGger<1|2>[:SEQuence]:LEVel:VIDeo <num_value>
:TRIGger<1|2>[:SEQuence]:SOURce EXTernal
:TRIGger<1|2>[:SEQuence]:LEVel[:EXTernal] -5.0...+5.0V
:TRIGger<1|2>[:SEQuence]:SOURce AF
:TRIGger<1|2>[:SEQuence]:LEVel:AF -120...+120PCT
:TRIGger<1|2>[:SEQuence]:SLOPe POSitive|NEGative
:TRIGger<1|2>[:SEQuence]:HOLDoff <num_value>
ON | OFF
ON | OFF
ON | OFF
IMMediate
6.296
FSE
F-16