6.4.1.1 Mains Supply Connection; 6.4.1.2 Terminal Assignment 'External Enable' 'Ecopro - Ecolab EcoPro Manuel D'utilisation

6.4.1.1 Mains supply connection

The mains cable is pre-assembled at the factory. Should the mains cable need to be
replaced due to local conditions, it is essential that all the descriptions and instructions
given below are observed.
CAUTION!
– Work on the mains connection may only be carried out by skilled
personnel who are duly trained and authorised.
– The electrical connection should be performed in line with the latest
valid CE regulations within the jurisdiction of the EU.
– In addition, observe the appropriate national regulations and local utility
company regulations.
– The mains voltage value must match the value specified on the type
plate.

6.4.1.2 Terminal assignment 'External enable' 'EcoPro'

L1 = mains phase (live conductor)
Colour: Brown
N = neutral conductor
Colour: Blue
The 'EcoPro' can be connected to a customer control unit, such as a PLC controller.
8 = GND
9 = Enable signal
47
Mounting and installation
417102264 Rev. 6-12.2019