Tractel POULISTOP 2 Notice D'utilisation page 17

 Storage
 It is advisable to remove the rope from the pulley for its storage.
Correctly store the instructions for use with the pulley.

 Keep the material in a dry place, protected from bad weather.
 Ensure that the pulley is stored with no loads attached.
 Functioning anomalies
 The sheave rotation must be free
No wobble and excessive clearance in the sheave.

 The wedge must be free
 Maintenance of the equipment
All maintenance inspections and operations must be performed by qualified and trained specialists
The POULISTOP2 is made of zinc plated steel and plastic, protecting it for normal use in outside
construction activities.
As all the Tractel Solutions products, it is manufactured without bearing welds, reducing inspections
before use to their minimum.
Spare parts (rope and wedge) are available from Tractel Solutions.
Those parts should be replaced immediately when wear appears.
Tractel Solutions stays at your disposal.
M 6116 M
rev 10 – 06.2021
GB
STORAGE AND MAINTENANCE
Page 17/42
www.tractel.com