Elem Garden Technic RIDER61-P Traduction Des Instructions Originales page 133

4.5 CUTTING HEIGHT ADJUSTING LEVER
move the lever sideways and put it back in one of the stop notches.
4.6 LEVER ENGAGEMENT AND BRAKE OF BLADE
A
B
a few seconds.
4.11 KEY IGNITION SWITCH
This key operated control has three positions:
Page 133 de 181
There are five positions for this lever,
4.5
shown as
«1» to «5» on the plate, which
correspond to various
cutting heights from 3.5 to 7.5 cm.
-- -
4.6
The lever has two positions, as shown on the
plate:
-- - If the blade is engaged when safety conditions have
not been complied with, the engine shuts down and
cannot be restarted ( ☛5.2).
-- - In disengaging the blade (Pos. «A»), a brake is
simultaneously activated which stops their rotation within
4.11
《 《 《 《 stop stop》 》 》 》 everything is switched off;
stop stop
《 《 《 《 on on》 》 》 》 activates all parts;
on on
《 《 《 《 start start start》 》 》 》 engages the starter start
To go from one position to another,