Elem Garden Technic RIDER61-P Traduction Des Instructions Originales page 130

3.4 FITTING THE BLADE ENGAGEMENT LEVER
3
3.5 CONNECTING THE BATTERY
1
2
handling and disposal. handling and disposal.
handling and disposal. handling and disposal.
Page 130 de 181
1
it the end of the lever (1) on the projecting part
2
of the pin (2) and fix it all by tightening the
screw (3) and nut (4)
4
1. Position the battery (1) in its compartment under the
seat;
2. Connect the battery connector (2) to the machine
connector (3);
3. Recharge the battery by following the instructions in
the
Manual(☛6.2.3).
3
Never start the engine until the battery is fully charged!
Follow the battery manufacturer's instructions regarding safe Follow the battery manufacturer's instructions regarding safe Follow the battery manufacturer's instructions regarding safe Follow the battery manufacturer's instructions regarding safe