Elem Garden Technic RIDER61-P Traduction Des Instructions Originales page 128

2.1 IDENTIFICATION OF THE MACHINE
The identification label located under the seat has the essential
data of each machine.
2.2 NAME AND ADDRESS OF MANUFACTURER
17
15
connecting the blade carrier to the grassbox. Only for RIDER61-P
14. Tray harvester: Only for RIDER61-P
15. Engine: this moves the blade and drives the wheels. Its specifications and
regulations for use are described in a specific manual.
16. Batteries (only in the electric start models): provides the energy for starting the
engine. Its specifications and regulations for use are described in a specific manual.
17. Driver seat: this is where the machine operator sits. It has a sensor which detects the
presence of the operator and acts as a safety device.
18. Labels for regulations and safety: give reminders on the main provisions for
working safely, each of which is explained in chapter 1.
19. Engine cover: for access to the engine
For storage and transport purposes, some components of the machine are not installed
in the factory and have to be assembled after unpacking. Follow the instructions below.
starting the engine, fill with oil and fuel following the instructions given in the engine
manual .
flat and stable surface, with enough space for machine handling and its
Page 128 de 181
19
The machine is composed of a series of
main component
18
11. Cutting deck: this is the guard
enclosing the rotating blade
12. Blade: this is what cuts the grass. The
wings at the ends help convey the cut grass
16
towards the collector channel.
12 11
13. Collecting channel: this is the portion
The machine is supplied without engine oil or fuel. Before
Unpacking and completing the assembly should be done on a
packaging,