1.2 GENERAL SAFETY REGULATIONS
A) TRAINING
1) Read the instructions carefully. Be familiar with the controls and how to use the
equipment properly.
2) Never let children or people unfamiliar with these instructions use the machine. Local
regulations can restrict the age of the user.
3) Never mow while people, especially children, or pets are nearby.
4) Keep in mind that the operator or user is responsible for accidents or hazards
occurring
to other people or their property.
5) Do not carry passengers.
6) All drivers should seek and obtain professional and practical instruction. Such
instruction should emphasize:
-- - the need for care and concentration when working with ride on machines;
-- - you cannot use the brake to regain control of a ride-on machine sliding down a slope.
The main reasons for loss of control are:
-- - insufficient wheel grip;
-- - over speeding;
-- - inadequate braking;
-- - the type of machine is unsuitable for its task;
-- - unawareness of the effect of ground conditions, especially slopes;
B) PREPARATION
1) While mowing, always wear sturdy footwear and long trousers. Do not operate the
equipment barefoot or wearing open sandals.
2) Thoroughly inspect the area where the equipment is to be used and remove all objects
which can be ejected from the machine.
3) DANGER! Petrol is highly flammable:
-- - store fuel in containers specifically designed for this purpose;
-- - refuel outdoors only and do not smoke while refueling;
-- - add fuel before starting the engine. Never remove the cap of the fuel tank or add
petrol while the engine is running or when the engine is hot;
-- -
if you spill petrol, do not start the engine and move the machine away from the area
of
spillage. Do not create any source of ignition until the petrol vapors have evaporated;
-- - put back and tighten all fuel tank and container caps securely.
4) Replace faulty silencers.
Page 123 de 181
Read carefully before using the machine.
Read carefully before using the machine
Read carefully before using the machine
Read carefully before using the machine