Elem Garden Technic RIDER61-P Traduction Des Instructions Originales page 129

always making use of suitable equipment
3.1 UNPACKING
When unpacking the machine, take care to gather all the individual parts, fittings and
documentation.
machine down from the pallet, take it to the maximum height and be very careful.
The supply includes:
-- - the battery;
-- - bolts and screws, necessary for completing the assembly;
-- - a syringe for draining the engine oil.
Disposal of the packaging should be done in accordance with the local
regulations in force.
3.2 FITTING THE STEERING WHEEL
3
4
3.3 FITTING THE SEAT
1
3
Page 129 de 181
. . . .
To avoid damaging the cutting deck when getting the
1
Put the machine on a flat surface and straighten up the front
wheels.
1. fit the steering wheel（1）onto the protruding shaft (2) and
fasten it with the screws (3) and nuts (4) supplied,
2
2
Fit the seat (1) onto the plate (2)
using the screws (3)
3