Technical Specifications - Simco-Ion Charge Master Tiny Notice D'utilisation

4 Technical specifications

Power supply and I/O
Supply voltage
Electricity consumption
Max. total cable length @ supply
Max. cable resistance per wire
Standard Simco 5x0,34 mm
M12 Male-Female cable
Optional Simco cable 5x 0,75mm²
High-voltage setpoint
Remote On/Off input
Speed after Remote On
HV OK output
Connection
Output
Output voltage
Output current
Environment
Operating environment
Temperature
Protection class
Signalling
HV OK output
LED indications
Green flashing quickly
Green flashing slowly
Orange
Red
Red flashing, slow (1 Hz)
Red flashing, fast (5 Hz)
Mechanical
Dimensions (lxwxh)
Weight
Housing material
CMTinyCMTinyIQ_UM_9752097710_NL_D_GB_F_V1_1
21 - 27 V DC
Max. 0,9 A
24V DC ±2%
2,8Ω
2
&
28m
56m
4 - 20 mA output voltage control,
≤ 4 mA = 0kV, 20 mA = 20 kV
Serial, using the Simco-Ion IQ platform (CM Tiny IQ only)
15 - 30 V DC = high voltage ON,
0 - 5 V = high voltage OFF
Serial, using the Simco-Ion IQ platform (CM Tiny IQ only)
Unloaded from 0 to 20 kV in min. 15 ms (analogue),
max. 0.4 s (connected to the IQ Easy platform)
24 V DC (±3 V), 50 mA max.
Serial, using the Simco-Ion IQ platform (CM Tiny IQ only)
M12-connector, 5-pin
0 - 20 kV DC
Max. 0,4 mA
Industrial, internal use
0 - 55°C
IP54
24 V DC (±3 V), 50 mA max.
Serial, using the Simco-Ion IQ platform (CM Tiny IQ only)
Start up
Standby, HV output inactive
Normal operation, HV output active
1) HV output overloaded, HV output active
2) Arcing, HV output temporarily not active
1) Generator overheated, HV output temporarily inactive
2) Supply voltage too low, HV output unchanged
3) HV OK output overloaded, HS output active
4) Charging pulse too long, HS output unchanged, (CM
onlyTiny IQ)
5) Eeprom read error, HS output unchanged
Communication with Simco IQ platform lost, HV output not
active (only CM Tiny IQ)
200 x 45 x 43 mm (including electrode head)
0.48 kg (excluding high-voltage cables)
Aluminium, ABS, PVC (electrode head)
24V DC ±5% 24V DC ±10%
2Ω 0,66Ω
20m 6,5m
40m 13m
GB
51