Technical Specifications - Simco-Ion ThunderION 2.0 Notice D'utilisation

4 Technical specifications

Required power supply*
Supply voltage
Current consumption
Standard cable
Connection
Output
Output voltage
Current per emitter to
earth
Environment
Operating environment
Ambient temperature
Cooling
Operating distance
Local functions
Indication of pulse
frequency setting
[On] signaling
[Error] signaling
[Warning] signaling
(only IQ version)
Remote functions
(standard version)
Remote On/Off input
Bar operating OK output
(HV OK)
Remote functions
(IQ version)
Mechanical
Effective bar length
Dimensions (WxHxL)
Weight
Housing
Emitter
Emitterholder
Mounting material
ThunderION2.0_UM_9752160050_NL_D_GB_F_V1_0
21–27 V DC
Max. 2 A DC
1Ω/10m
M12 connector, 5-pin
Max. 30 kV positive and negative
<150 uA
Industrial
0 – 55°C
Convection
300 – 1000 mm
Flashing red and green LEDs during start-up of the bar
Green LED
Red LED lights up in the case of an internal overload or
short circuit.
Red LED flashes when the HV OK output is overloaded
or other errors have been detected (e.g. supply voltage
too low, overheated power supply)
Orange LED when Bar needs to be cleaned
Switching high voltage on and off
Control voltage specifications:
10 V DC, 10 mA min.
30 V DC, 25 mA max.
Indicates that the bar is operating correctly
(when high voltage is switched on).
Uo= Supply voltage — 1 V, Max. 50 mA
Through the IQ Easy manager the bar can be
monitored and controlled (see manual IQ Easy
manager)
250 mm to 4750 mm
61 mm x 114 mm x total length (Eff. Length + 195 mm)
0.8 kg + 2.4 kg/m
Plastic
Special alloy
Silicone
Brackets
GB
43