Introduction; Safety; Use And Operation; Technical Specifications - Simco-Ion CONVEYOSTAT Mode D'emploi

USER'S MANUAL FOR CONVEYOSTAT

1. Introduction

Read this manual completely before you install and put this product into use.
Follow the instructions set out in this manual to ensure proper operation of the product and to
be able to invoke guarantee.
The guarantee terms are stated in the General Sales Conditions of SIMCO (Nederland) B.V.

2. Safety

- The Conveyostat
- The Conveyostat
material.
- Do not make any changes to the Conveyostat
- When carrying out work on the equipment: switch off the supply voltage.
- Make sure that the equipment is properly earthed.
Earthing is needed to ensure proper operation and to avoid electrical shocks upon contact.
- Electrical connections and repairs shall be made by a skilled electrical engineer.

3. Use and operation

®
The Conveyostat is designed to neutralize static charges on materials in pneumatic conveying
systems. Problems caused by static charges, for instance sticking, clotting and clogging of the
system are hereby avoided.
®
The Conveyostat should be connected to a Simco-Ion AC high voltage power unit, type LB.
The high voltage supplied by the high voltage power unit generates an electrical field in the
bars, which causes the air molecules around the emitter points in the bars to be converted to
positive and negative ions. When the charged material comes close to these emitter points, ions
are exchanged until the material is neutral.

4. Technical specifications

Operating voltage:
Operating temperature:
Operating conditions:
Protection classification
®
Conveyostat _UM_9752972310_NL_D_GB_F_V2_0
®
is only designed to neutralize static electricity.
®
is unsuitable for use with conductive and/or inflammable
4 kV AC
0 - 50°C
industrial
IP 40 standard
®
®
.
12