Controls - Tennant S8 Mode D'emploi

3.1 -CONTROLS

1 9
Fig.3
1) Side brush control lever: switch the lever to lower position
and the side brush will move into the work position and start
spinning. To stop the side brush, switch the lever to upper
position.
2) Key switch: turns power to the machine on.
3) Power indicator light.
4) Charge indicator light: this light indicates the state of the
battery during operation.
5) Vacuum indicator light.
2 4 8 6
1
6) Traction lever: By pulling this lever, the machine will start
moving forward
7) Filter shaker lever: this lever operates the filter shaker to
clean the filter (see the section on filter maintenance).
8) Vacuum fan switch.
9) Lever for the dust flap for bulky debris.
- 8 -
3 4 5
8