Changing The Input Button Assignments Of The Remote - Sony HT-CT150 Mode D'emploi

Remote Button
qj O RETURN
qk C, X, x, c,
Changing the input button
assignments of the remote
You can change the factory settings of the input
buttons to suit the components in your system.
For example, if you connect a Blu-ray Disc
player to the DVD jack on the system, you can
set the DVD button on this remote to control the
Blu-ray Disc player.
You cannot change the remote assignments for
TV and DMPORT.
INPUT
Number
buttons
MASTER
VOL +/–
28
US
Function
Returns to the previous
screen of any displayed
menu.
Selects a menu item and
enters the selection.
AV ?/1
?/1
Input
buttons
1
Press and hold the input button whose
assignment you want to change, and
then press and hold AV ?/1 at the same
time.
Example: While holding down DVD, press
and hold AV ?/1.
2
While continuing to hold down AV ?/1,
release the input button you selected in
step 1.
Example: While continuing to hold down
AV ?/1, release DVD.
3
While continuing to hold down AV ?/1,
refer to the following table and press
the corresponding number button for
the category you want.
Example: While continuing to hold down
AV ?/1, press 1.
4
Release the number button you
selected in step 3, and then release AV
?/1.
Example: Release 1, then release AV ?/1.
Now you can use the DVD button to control
the Blu-ray Disc player.