English - Philips HD6104 Mode D'emploi

ENGLISH

6
General description (fig.1)
A Frying basket
B Lid
C 'MIN' and 'MAX' indications
D Cord storage compartment
E Cord
F Integrated handles
G Separate digital timer (HD6104 only)
H Temperature control
I PreClean function
J Temperature light
K Lid release button
L Inner bowl
M Pour-out facility
Important
Read these instructions for use carefully before using the appliance and save them for future
reference.
Check if the voltage indicated on the appliance corresponds to the local mains voltage before
you connect the appliance.
Only connect the appliance to an earthed wall socket.
If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by
Philips or similarly qualified persons in order to avoid a hazard.
Always return the appliance to a service centre authorised by Philips for examination or
repair. Do not attempt to repair the appliance yourself, otherwise your guarantee will
become invalid.
Clean the separate parts of the fryer thoroughly before using the appliance for the first time
(see chapter 'Cleaning'). Make sure all parts are completely dry before you fill the fryer with
oil or liquid fat.
During frying, hot steam is released through the filter. Keep your hands and face at a safe
distance from the steam.You should also be careful of the hot steam when you open the lid.
Place the appliance on a horizontal, even and stable surface out of the reach of children.
Do not let the mains cord hang over the edge of the table or worktop on which the
appliance is standing.
This appliance is intended for household use only. If the appliance is used improperly or for
professional or semi-professional purposes or if it is used in a way that is not in accordance
with the instructions for use, the guarantee will become invalid and Philips will not accept
liability for any damage caused.
Fry food golden-yellow instead of dark or brown and remove burnt remnants! Do not fry
starchy foods, especially potato and cereal products, at a temperature above 175cC (to
minimise the production of acrylamide).
Preparing for use
1 Clean the appliance before first use (see chapter 'Cleaning').
2 Open the lid (fig. 2).
3 Consult the oil/fat table to determine how much oil or fat you should put in the fryer (fig. 3).
4 Fill the dry fryer with oil, liquid frying fat or melted solid fat to a level between the 'MIN' and
'MAX' indications and close the lid (fig. 4).
Do not switch the appliance on before you have filled it with oil or fat.