Replacing Defective Fuse - Medela Basic Mode D'emploi

12 Replacing defective fuse

WARNINGS
Before replacing the fuse, pull the mains plug from Basic out of the fixed mains socket.
1.
2.
3. Replace the defective fuse(s). Make sure that the technical
specifications are correct.
T 1.6 AH, 250 VAC, 5 x 20 mm
4.
5.
1.1 Disconnect the Basic from
the mains.
1.2 If attached, remove the
cable holder (2 screws on
bottom).
2.1 Open (pull out) the fuse
holder on the back of the
Basic.
4.1 Close (push back) the fuse
holder.
5.1 Reconnect the Basic to
the mains again.
5.2 Switch on the Basic again.
Replacing defective fuse
| 25