Sensopart FT 50 C S1 Série Instructions De Service Et De Montage page 62

INFORMATION
The prerequisite for use of the sensor on a PC is a RS485 interface on the PC. If no RS485 inter-
face is available, an adapter is to be fitted to the existing interface (RS 232, USB, etc.).
We recommend the following adapter:
If your PC has a RS232 interface, use the RS232 converter K2-ADE-TB *
If your PC has a USB interface, the additional CUSB-RS485-Set *
* See accessory list for part numbers
3
INFORMATION
Data sheets, instruction manuals and operating software (Progsensor) are available for downloa-
ding on www.sensopart.com.
62
operating instructions
.
3
is required.
3
FT 50 C...S1 Colour sensor - GB - 068-13821 - 10.10.2011-04
Mounting and