Sensopart FT 50 C Instructions De Service Et De Montage

COLOUR SENSOR FT 50 C
All-purpose, compact device for on-line colour detection in industrial sequences and processes.
Light spots
In order to cover as many application possi-
bilities as possible, the FT 50 C is available with
three different sized light spots:
Ø 4 mm (at scanning distance 22 mm)
2 x 2 mm (at scanning distance 22 mm)
1 x 5 mm (at scanning distance 22 mm)
Depth of focus
The depth of focus alters according
to the size of the light spot:
+/- 6 mm (factory setting)
+/- 5 mm (factory setting)
+/- 2 mm (factory setting)
4
Downloaded from Elcodis.com electronic components distributor
FT 50 C-I: ø 4 mm
FT 50 C-2: 2 x 2 mm
FT 50 C-3: 1 x 5 mm
Keypad
All the sensor settings can be carried out
using 2 keys.
7 LEDs provide a visual aid during teach-in
and provide information on the signal status
of the outputs.
Tolerance ranges
The detection window can be adjusted by
setting the colour selectivity.
The winner of the Baden-Württemberg
Prize for Innovation excels due to
its compactness and excellent colour
selectivity.
>
FT 50 C
>
>
>
>
>
FT 50 C
FT 50 C ... S1
Scan function
With inhomogeneous colour surfaces, colour
sequences can be scanned and stored using
the scan function. Colours within the scanned
colour spectrum are subsequently detected.
Tol 4
Tol 3
Tol 2
Tol 1
Teach-in of single colours or
scanning of colour ranges
Storage of reference colours in
teach-in mode, either by pressing
a key on the sensor or via an
external input cable
High colour selectivity,
insensitive to fluctuating
scanning distances
Colour selectivity can be adjusted
separately for each colour
Three different sized light spots
available
FT 50 C standard: 3 separate
colour channels and signal outputs
for separation of objects.