Unpacking And Assembly - GGP ITALY SPA 72 Manuel D'utilisation

3. UNPACKING AND ASSEMBLY

For storage and transport reasons, some components of the
machine are not directly installed in the factory, but have to be
assembled after their removal from the packing. Final assem-
bly is carried out by following these simple instructions.
IMPORTANT
For transport reasons the machine is
supplied without engine oil or fuel. Before starting up the
engine, fill with oil and fuel following the instructions given in
the engine booklet.
WARNING!
Unpacking and completing the
assembly should be done on a flat and stable surface,
with enough space for machine handling and its packag-
ing, always making use of suitable equipment.
3.1 UNPACKING
When unpacking the machine, take care to gather all individual
parts and fittings, and do not damage the cutting deck when
taking the machine off the base pallet.
The standard packing contents:
– the machine;
– the battery;
– steering wheel;
– seat;
– grass-catcher components;
– an envelope containing the instruction manual, documents
and the nuts and bolts with two starter keys, a pin for block-
ing the steering wheel and a spare 10 Ampere fuse (6.3 A
with Honda engine).
Disposal of the packaging should be done in accordance with
the local regulations in force.
3.2 ASSEMBLY AND CONNECTING THE BATTERY
Remove both the rear
column cover (1) fas-
tened with two screws
(2) and the front column
cover (3) fastened with
another two screws (4).
Fit the battery (5) in
place and secure it with
the bracket (6) and the
nut (7).
Connect the three red
cables (8) to the positive
terminal (+) and the
three black cables (9) to
the negative terminal (–)
using the screws sup-
plied. Follow the
instructions given.
Put the column covers
(3) and (1) back on with
2
1
4
7
8
5
6
3
4
9
EN 9