Switch On, Start Of Cooking And Switch Off; Cleaning And Care Of The Appliance - OFFCAR 900 Série Mode D'emploi

3.2.2. SWITCH ON, START OF COOKING AND SWITCH OFF MOD.
P
ILOT BURNER LIGHTING
- Open the door of the fender for gas-valve on the front panel.
Starting from position ⚫ press the gas-valve knob and turn right wards to position
-
keep the gas-valve knob pressed and press the piezoelectric ignition button several
times . (mod. 90BRG12I / 90BRG15I)
- Keep the gas-valve knob pressed for a few more seconds.
- Release the gas-valve knob and control if the pilot burner is lit.
- Repeat the operation if the flame turns off.
M
AIN BURNER IGNITION AND TEMPERATURE REGULATION
- Once the pilot burner has been lit, turn the gas-valve knob towards right to the positon
" ".
Turn the thermostat knob (on the gas-valve knob) from the position "●" to the desired
-
temperature between 45° and 295°, and that causes the automatic ignition of main
burners.
- The regulation of the thermostat causes the automatic ignition and extinction of the
main burner (ON/OFF regulation); only the pilot flame is lit.
T
URNING THE PILOT BURNER OFF
Press thermostat knob and turn to position ⚫ to turn off the pilot burner and prevent
-
the main burner from lighting.

3.3. CLEANING AND CARE OF THE APPLIANCE

- The correct operation of the appliance is guaranteed only if these instructions are
followed very carefully.
- Any repairs or maintenance operations must be performed only by qualified
technicians. We recommend to have the appliance controlled at least once a year; for
this purpose it is advisable to apply for a service contract.
- Keep the thermocouples constantly clean and treat them carefully.
- Control the burner gas outlet holes periodically. They must always be kept clean.
− Do not use aggressive substances or abrasive detergents when cleaning the stainless
steel components.
Instruction manual for installation, maintenance and use
GAS TILTING BRATT PANS Serie 900
90BRG12I / 90BRG15I
- GB - 19 di 36
Page
;