OFFCAR 900 Série Mode D'emploi page 89

3.2.1. SWITCH ON, START OF COOKING AND SWITCH OFF MOD.
− The appliance is equipped with a selector to start all cooking operations (see figure
"Controls").
− Here is a list of the procedures for a safe and correct use of the appliance.
- The appliance can be started only once it has been filled.
P
ILOT BURNER LIGHTING
Starting from position ⚫ press the thermostat knob and turn leftwards to position
-
keep the thermostat knob pressed and press the piezoelectric ignition button several
times .
- Keep the thermostat knob pressed for a few more seconds.
- Release the thermostat knob and control if the pilot burner is lit.
- Repeat the operation if the flame turns off.
M
AIN BURNER IGNITION AND TEMPERATURE REGULATION
- Once the pilot burner has been lit, turn the thermostat knob towards left to the desired
temperature. The thermostat knob is numbered from 1 to 7; the temperatures
corresponding to each position are the following:
Position 1
°C 100
- The regulation of the thermostat causes the automatic ignition and extinction of the
main burner (ON/OFF regulation); only the pilot flame is lit. When the thermostat knob
is turned towards rights to position
pilot flame is on.
T
URNING THE PILOT BURNER OFF
Press thermostat knob and turn to position ⚫ to turn off the pilot burner and prevent
-
the main burner from lighting.
Instruction manual for installation, maintenance and use
GAS TILTING BRATT PANS Serie 900
80BRG80I / 90BRG90I
2 3 4 5
125 150 180 210
, the main burner is constantly off and only the
6 7
250 290
- GB -
;
18 di 36
Page