Layout Of The Customer And System Structure; Display Layout; Tri-Ka - Functions; Power Measurement - Tritec TRI-KA Mode D'emploi

188_TRI-KA – Overview

6.4 layout of the customer and system structure

The measured data are stored on the SD card and hierarchically
managed in the TRI-KA measuring instrument and the PC soft-
ware.
To each hierarchy level can be added any number of further lev-
els. The levels can be given any name. The measured data are
saved in the relevant strings.
The hierarchy levels can be created in the PC software and then
selected in the TRI-KA or directly entered in the TRI-KA.

6.5 display layout

1 2 3 4
General information about the measuring instrument and the
currently open window is shown at the top and bottom of the
screen:
1. Battery status
> shows the remaining battery charge
2. Wireless connection
> shows whether a wireless connection to the TRI-SEN exists
3. progress indicator
> shows instrument activity and progress
4. date/ time
> shows the date and time set for the instrument
5. navigation indicator
> shows which TRI-KA window is open. In the Home screen,
it shows the instrument's serial number.
5 6
6. Firmware number
> is shown in the Home screen
TRI-KA – Functions_189
7. tRi-Ka – Functions

7.1 power measurement

Press the Power Measurement button to start measuring the cur-
rent /voltage characteristic curve.
The process progress is shown in the bottom part of the screen.
The two arrow keys allow navigation to the previous and the next
step. The Home button takes you back to the main menu.
Window 1 / 7 – pV data 1
Selection or entry of customer and system data on the photovol-
taic system to be measured.
You can immediately start the characteristic curve measurement
using the button Power Measurement. The default data will be
used for the characteristic curve measurement.