Tritec TRI-KA Mode D'emploi page 100

200_TRI-KA – Functions
set time and date
Click on the clock symbol to set both the time and the date of the
instrument.
The time and date are changed in the appropriate input fields us-
ing the numerical keypad.
language and display settings
Display and instrument settings are made by clicking on the
screen symbol. This is also where the TRI-KA language can be
changed.
set backlight
The brightness of the display backlight can be set in four stages.
Auto switch-off automatically switches the device off after the set
time. Switch-off times range from 1 to 15 minutes. This function
is deactivated with the Off button.
change display background
Use the right button at the bottom of the screen to change be-
tween a black and white background. Press the gear button to
return to the Settings screen.
TRI-KA – Functions_201
show memory space and format sd card
Click on the Memory button to view the memory available on the
inserted SD card.
The memory card in the TRI-KA is formatted under Memory Card
Settings. Once the formatting has been confirmed, all data on the
memory card are deleted.
set minimum irradiation
The monitoring values for the power measurement are changed
in the Data submenu. If the current level of irradiation falls below
the set value, the measurement is aborted resulting in an error
message.