Entering Programming Mode - Motorola Solutions CLS 1413 Guide De L'utilisateur

Entering Programming Mode

Press and hold Push to Talk and
radio beeps and displays
(indicated by
Note: If you press and release the Push to Talk button when programming
CLS1413 models, you will return to the front of the Programming Mode
Selecting a Channel
1. In programming mode, press
and the frequency and code display alternately (this is the first
setting after you enter programming mode).
2. Press
3. Press and hold Push to Talk to exit programming mode, or
press
Configuring the operating frequency from a pre-programmed frequency list
1. In programming mode, press
frequency number blinks.
2. Press
3. Press and hold Push to Talk to exit programming mode, or
press
Note:
See page 37 for information on frequencies for communicating with other business radios. If
you are matching your
26
, the channel number blinks, and the frequency
) and code (indicated by
or to select the channel.
to continue programming.
or to select the frequency.
to continue programming.
for 3 seconds while turning the radio on. The
) display alternately.
until the channel number blinks
until displays and the
Series radio to an existing Spirit GT radio, see page 41.
.