Rear Panel - Korg SV-1 Stage Vintage Piano Mode D'emploi

R
EAR PANEL
The back panel is where you can find most of the connections.
1
3 4
❶
POWER connector
Connect the included IEC power cable here.
❷
MUSIC STAND holes
A music stand comes standard with your SV-1. Insert its legs into these two dedicated
holes.
❸
USB DEVICE connector
Use this connector to connect a computer for sequencing (this doubles the MIDI
ports), or for using the SV-1 Editor software for fine editing. Before using this connec-
tor, please install the KORG USB-MIDI Driver (the relevant instructions are provided
together with the MIDI Driver on the Accessory Disk, or can be downloaded from our
web site).
❹
PEDAL jacks (DAMPER, 1, 2)
Connect the supplied Korg DS2H pedal to the DAMPER jack. Connect a footswitch to
PEDAL 1 and either a footswitch or an expression pedal to PEDAL 2.
DAMPER always operates as a damper pedal. Use it to connect the supplied Korg DS-
2H damper pedal.
Controls and connections | Rear panel – 15
2
5 6 7